How to Control Laptop Fan Speed: 6 Methods I Tested
How to control laptop fan speed, tested on an ASUS G16: Windows has no fan setting, so here’s which of 6 methods actually changed my fans.
The free, lightweight control app for ASUS laptops that replaces Armoury Crate.

How to control laptop fan speed, tested on an ASUS G16: Windows has no fan setting, so here’s which of 6 methods actually changed my fans.

Best laptop fan control software compared on an ASUS G16: what 5 apps control, what they install, and which ones can reach a laptop’s fans at all.

I tested 6 ways to control fan speed on my ASUS Zephyrus G16 in Cyberpunk: Armoury Crate’s modes and Manual curve, G-Helper and AsusFanControl.
G-Helper core clock offset tested on an RTX 4070: +200 added under 1 FPS, but a 2150 MHz clock limit cut GPU power 23% for 4% fewer frames.
The G-Helper overlay shows FPS, temps and power in any game. All 4 modes, every shortcut, and whether it cost me FPS in Cyberpunk on my G16.
There’s 3 sliders in G-Helper’s Fans + Power section with no explanation attached. Here’s what each one caps, who they actually matter for, and what I’ve got mine set to on my G16.
My Zephyrus G16 idles at about 13W in Standard mode with a live 4070, only 5-10W off what Eco gets me. Where the two actually separate is the spikes, and which of the 4 modes routes your display through which chip.
If you’re asking is G-Helper safe, the short answer is yes, and I’ve been running it daily for about four months on my ASUS Zephyrus G16 without a single problem caused by the app itself. The things that do go wrong tend to be Windows rather than G-Helper, which I went through separately in G-Helper…

What all 7 G-Helper CPU Boost modes actually do, why my G16’s stock Windows plan was already on Aggressive, and which mode fits battery vs plugged-in use.

Stock ASUS laptop fan curves are tuned for safety, not for what most people actually want. Your laptop’s fans could be seriously aggressive while you’re browsing or dead weak at moments with the most heat. This article is going to go over how to use G-Helper’s fan curves to optimize your laptop, getting you the…

Your laptop’s stock software gives a fraction of the control that G-Helper does, with the added bloat as well, and I broke down that whole tradeoff in my G-Helper vs Armoury Crate comparison. G-Helper, a free minimal application, makes it feel crazy that this much control can come from a few clicks. But with this…

Here is a step-by-step guide to undervolting with G-helper. Undervolting is the act of giving your CPU less energy than it’s programmed to get. If you’re wondering how to get the most out of your laptop’s battery life, undervolting is definitely something to consider, and it’s 1 of the 6 settings in the G-Helper battery…

ASUS’s Armoury Crate is undeniably a useful tool to tweak and personalize how you use your laptop, but it’s heavy. Unfiltered bloat and undeserved RAM usage have led people to search for a “lighter” alternative. This was my own thought process as well before I tried it out, and now I can say that G-Helper…

What ASUS System Control Interface v3 installs on a G16, why G-Helper needs it, and which of its services I stopped without breaking Armoury Crate.
Uninstall G-Helper by deleting one exe, but it leaves 2 scheduled tasks behind. What to reset first, and what happens to your settings afterward.

The official G-Helper download link, the lookalike site to avoid, and my 5-minute ASUS setup: removing Armoury Crate and the first settings to change.
The G-Helper keyboard backlight costs about 1-2W at max on my G16. All 5 effects, where the brightness slider hides, and why per-key RGB isn’t there.
G-Helper not opening, not starting on boot, and not showing your GPU temp are the 3 complaints that fill the search results, and on my Zephyrus G16 all 3 turned out to be normal behavior rather than a broken app.
ASUS Battery Care Mode on my G16: what the 80% limit did to my battery health, which of 60%, 80% or 100% fits how you use it, and where to set it.

How to control laptop fan speed, tested on an ASUS G16: Windows has no fan setting, so here’s which of 6 methods actually changed my fans.

Best laptop fan control software compared on an ASUS G16: what 5 apps control, what they install, and which ones can reach a laptop’s fans at all.

I tested 6 ways to control fan speed on my ASUS Zephyrus G16 in Cyberpunk: Armoury Crate’s modes and Manual curve, G-Helper and AsusFanControl.

What ASUS System Control Interface v3 installs on a G16, why G-Helper needs it, and which of its services I stopped without breaking Armoury Crate.
G-Helper core clock offset tested on an RTX 4070: +200 added under 1 FPS, but a 2150 MHz clock limit cut GPU power 23% for 4% fewer frames.
The G-Helper overlay shows FPS, temps and power in any game. All 4 modes, every shortcut, and whether it cost me FPS in Cyberpunk on my G16.
Uninstall G-Helper by deleting one exe, but it leaves 2 scheduled tasks behind. What to reset first, and what happens to your settings afterward.
The G-Helper keyboard backlight costs about 1-2W at max on my G16. All 5 effects, where the brightness slider hides, and why per-key RGB isn’t there.
There’s 3 sliders in G-Helper’s Fans + Power section with no explanation attached. Here’s what each one caps, who they actually matter for, and what I’ve got mine set to on my G16.
My Zephyrus G16 idles at about 13W in Standard mode with a live 4070, only 5-10W off what Eco gets me. Where the two actually separate is the spikes, and which of the 4 modes routes your display through which chip.
G-Helper not opening, not starting on boot, and not showing your GPU temp are the 3 complaints that fill the search results, and on my Zephyrus G16 all 3 turned out to be normal behavior rather than a broken app.
If you’re asking is G-Helper safe, the short answer is yes, and I’ve been running it daily for about four months on my ASUS Zephyrus G16 without a single problem caused by the app itself. The things that do go wrong tend to be Windows rather than G-Helper, which I went through separately in G-Helper…

What all 7 G-Helper CPU Boost modes actually do, why my G16’s stock Windows plan was already on Aggressive, and which mode fits battery vs plugged-in use.

Stock ASUS laptop fan curves are tuned for safety, not for what most people actually want. Your laptop’s fans could be seriously aggressive while you’re browsing or dead weak at moments with the most heat. This article is going to go over how to use G-Helper’s fan curves to optimize your laptop, getting you the…

Your laptop’s stock software gives a fraction of the control that G-Helper does, with the added bloat as well, and I broke down that whole tradeoff in my G-Helper vs Armoury Crate comparison. G-Helper, a free minimal application, makes it feel crazy that this much control can come from a few clicks. But with this…
ASUS Battery Care Mode on my G16: what the 80% limit did to my battery health, which of 60%, 80% or 100% fits how you use it, and where to set it.

Here is a step-by-step guide to undervolting with G-helper. Undervolting is the act of giving your CPU less energy than it’s programmed to get. If you’re wondering how to get the most out of your laptop’s battery life, undervolting is definitely something to consider, and it’s 1 of the 6 settings in the G-Helper battery…

The official G-Helper download link, the lookalike site to avoid, and my 5-minute ASUS setup: removing Armoury Crate and the first settings to change.

ASUS’s Armoury Crate is undeniably a useful tool to tweak and personalize how you use your laptop, but it’s heavy. Unfiltered bloat and undeserved RAM usage have led people to search for a “lighter” alternative. This was my own thought process as well before I tried it out, and now I can say that G-Helper…